Matrix-orbital VFD2041 Uživatelský manuál stáhnout pdf (Strana 31)

Description This command will move the cursor forward one space. If this

command is sent when the cursor is at the bottom right position the

cursor will wrap back to the home position if line wrap is on. Sending

this command will not effect the text displayed on the module, however

any characters that are sent will over write the current characters that are

being displayed.

Remembered No

5.12 Blinking Block Cursor On

Syntax

Hexadecimal 0xFE 0x53

Decimal 254 83

ASCII 254 “S”

Description This command will cause the VFD2041 to display a block cursor at the

current text insertion point.

Remembered Yes

5.13 Blinking Block Cursor Off

Syntax

Hexadecimal 0xFE 0x54

Decimal 254 84

ASCII 254 “T”

Description This command will turn the block cursor off.

Remembered Yes

6 Special Characters

6.1 Introduction

The VFD2041 has the ability to create four different sets of eight custom characters and save them to

internal banks of memory. Each set of eight can be recalled from memory at any time, and selected characters

can be written to the display screen. Characters and sets can be created at any time, saved for later use, and

displayed to the screen through the intuitive command structure described below.

6.2 Creating a Custom Character

Matrix Orbital VFD2041 27

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 52 53

Žádné komentáře

Matrix-orbital VFD2041 Uživatelský manuál Strana 31